Deezen

MARCH 12, 2023

Finnish mobile manufacturer Nokia has partnered with repair specialists iFixit to release the smartphone G22, which comes with replaceable parts and toolkits so that customers can fix their phone themselves. The Right to Repair Regulations was introduced by the UK government in 2021 with the aim of reducing energy usage and electrical waste.

Manufacturing 98

Manufacturing Regulation Engineering Engineering 98

Building and Interiors

APRIL 8, 2022

MEP consulting engineers are well-versed in a variety of commercial building issues. Engineering consultants with extensive experience offer bespoke solutions to increase the energy efficiency of existing buildings and provide creative solutions for new building systems with assistance from brands like SCHELL. About Mr. B.O.

Consulting 59

Consulting Engineering Engineering Technology 59

Hotel Designs

APRIL 4, 2023

Yet, there is a lot more to cork than its green properties… For years, we have raved about Granorte and its innovative manufacturing process, producing cork floors and other products in Portugal, where it has been finding new ways to use the waste cork from wine stopper production since 1972.

Government 98

Government Sustainability Manufacturing Commercial 98

Deezen

MARCH 20, 2023

Forté was built by Lend Lease The building was made from 759 cross-laminated timber (CLT) panels created from European spruce, which was grown and harvested in Austria by manufacturing company KLH. Following the building's completion, regulations were changed to allow mass-timber structures to be constructed easier.

Regulation 103

Regulation Safety Engineering Engineering 103

Deezen

SEPTEMBER 3, 2023

Blending systems, thinking and human-centred design with technical analysis as well as physical and digital prototyping, you'll learn the intellectual and practical skills you need to become a well-rounded designer or design engineer. ZenDen can be folded flat against the wall when not in use so it doesn't encroach on the classroom's space.

Students 98

Students Project Engineering Engineering 98

Architecture Ideas

MARCH 28, 2022

Architects and engineers have more planning and design freedom with precast concrete panels. Precast Concrete panels are constructed in a regulated manufacturing environment, with a variety of colour, pattern, and texture combinations possible. The advantages mentioned above cannot be accomplished or a good manufacturer.

Manufacturing 88

Manufacturing Regulation Real Estate Construction 88

Hotel Designs

MAY 5, 2023

Hotel Designs Industry insight: how wellness is changing in hotel design Industry insight: how wellness is changing in hotel design Thought leaders from across the architecture, design, education, engineering and plumbing industries have come together to discuss the future of washroom design in hotel design.

Industrial 98

Industrial Design Regulation Management 98

Deezen

MARCH 23, 2023

Dalston Works is a mixed-use development in east London It was designed by local architecture studio Waugh Thistleton Architects – a Shoreditch-based timber specialist that has been predominantly working with engineered wood since 2003. Architects need to start driving demand – seeking out opportunities to design in timber and build a market.

Government 115

Government Regulation Sustainability Materials 115

Deezen

JULY 7, 2023

How and why new products are developed is driven by social dynamics, regulations and economic forces." The wrap is currently made from a blend of compostable biopolymers called PHAs, manufactured locally in a solar-powered factory. The product marks the over 60-year-old pillow manufacturer's commitment to become more sustainable.

Manufacturing 94

Manufacturing Design Estimating Events 94

DesignScape Architects

JUNE 2, 2020

However, sometimes these technical details will need to be authorised by engineers and other professionals. Once a material has been selected, the architect or engineer will need to figure out how the material will be installed to the building or joined to another material. This often requires careful detailing.

Regulation 52

Regulation Manufacturing Government Client 52

Deezen

MAY 25, 2023

Electric vehicles (EVs) are set to dominate our roads in the coming decades, with many countries intending to ban the sale of new internal combustion engine (ICE) cars by 2035 including the UK, China, Japan and most of Europe, as well as several US states. Already demand for plug-in cars is surging.

Technology 111

Technology Technology Design Transportation 111

DesignRulz

APRIL 24, 2023

Here are some potential future trends that could have a significant impact on 3D modeling and rendering: Real-time rendering: With advances in graphics processing units (GPUs) and game engine technology, real-time rendering is becoming more feasible for architectural visualization.

Visualization 72

Visualization Client Clients Technology 72

aasarchitecture

SEPTEMBER 4, 2023

The architecture of the building attains its objective of revolutionising the idea of what a manufacturing space should be by replacing the image of a closed, compact structure with one of maximum openness and permeability, able to create a dialogue with the local community and the environment. MEP: MF Minerbo Fuchs Engenharia S.A.

Architect 64

Architect Manufacturing Roofing Management 64

Deezen

DECEMBER 18, 2023

"The RWC is constituted by a diversity of ecosystems – coastal, wetland, salt marsh, mudflat and forest – each providing ecosystem services such as the provisioning of habitats and regulating temperature. A neoprene compression funnel regulates the speed of exiting fruit when unloading into pallet bins.

Project 126

Project Students Architecture Design 126

Deezen

SEPTEMBER 21, 2022

The launch of the initiative comes three years after the formation of Architects Declare and Engineers Declare in 2019. Architecture and engineering have a series of bodies that help to regulate their industry," she told Dezeen. But there is no chartership for design in the UK. So we would like to avoid that.".

Industrial 91

Industrial Government Design Engineering 91

BD+C

JULY 20, 2023

APA – THE ENGINEERED WOOD ASSOCIATION Multifamily Housing While no building is truly fireproof, construction materials and systems can make a building fire safe. Here’s a glimpse into some of the most cost-effective, fire-rated construction systems you can design or build using engineered wood products.

Construction 52

Construction Construction Insurance Safety 52

Architecture Here and There

APRIL 3, 2023

The school was formed in 1877 to soften and sweeten the local manufacturing process. As set forth in its original bylaws, its first goal was to foster “[t]he instruction of artisans in drawing, painting, modeling, and designing, that they may successfully apply the principles of Art to the requirements of trade and manufacture.”

Manufacturing 52

Manufacturing Regulation Deconstruction Nature 52

Santa Cruz Architect

APRIL 30, 2022

Engineers and entrepreneurs are testing out new ways of building things—in terms of both methodology and materials—to make construction more eco-friendly, not to mention cut its costs and provide better spaces for people to work and live in. 3D printed houses are one trend that’s been on the rise for a couple years.

Mining 78

Mining Construction Construction Industrial 78

Bustler

NOVEMBER 1, 2022

Technology consultants of the manufacturing companies are at hand to consult about different materials and technologies. Individual manufacturing processes and on-site assembly will be shared through our social channels throughout the project.

Students 40

Students Inspiration Masterplanning Zoning 40

Deezen

NOVEMBER 30, 2022

In the case of Grenfell Tower, the primary way in which the cladding system designs were non-compliant with building regulations was that they used combustible insulation panels in a combination which had never been tested or approved. Like most UK public sector projects, Grenfell was made a design and build job.

Safety 104

Safety Building Architect Contractor 104

BD+C

MARCH 19, 2024

engineering and construction companies receive requests from customers to lower the amount of embodied carbon used in construction projects. GOING BEYOND REGULATORY REQUIREMENTS Local, state, and federal building codes and regulations are a major factor in driving the industry in a sustainable direction.

Project 52

Project Building Contractor Sustainability 52

Habitus Living

AUGUST 1, 2022

The poor thermal performance of residential buildings in Australia – summer or winter – is infamous, but in a country that has traditionally enjoyed relatively affordable energy it’s been left to the committed conservationist to explore efficiency solutions beyond the minimum housing regulations. V-ZUG quickly emerged as the standout.

Development 52

Development Developer Housing Sustainability 52

Deezen

SEPTEMBER 16, 2022

Courses: MSc Medical Visualisation and Human Anatomy, MDes Design Innovation and Service Design, MSc Product Design Engineering, MDes Fashion and Textiles, MDes Sound for the Moving Image, MArch Architectural Studies, MDes Interior Design and MDes Photography, Illustration and Graphics. Glasgow School of Art. Student: Humayra Tabassum Bakar.

Art 98

Art Project Students Design 98

Santa Cruz Architect

NOVEMBER 15, 2023

The key lies in microorganisms or capsules embedded in the concrete mix during the manufacturing process. Similarly, thermochromic materials change color with temperature variations, optimizing energy efficiency by regulating the amount of sunlight absorbed. These microorganisms lie dormant until cracks appear.

Materials 70

Materials Construction Construction Sustainability 70

e-architect

AUGUST 24, 2023

The locally sourced, natural stone façade connects the building to its surrounding heritage while providing the benefits of reducing the need for manufactured products and offering extended durability to suit the long design life of the building. The building achieves an 8.5% kWh/m2/yr improved to 61.45 kWh/m2/yr in use.

Building 52

Building Students Regulation Consulting 52

Architecture Ideas

MAY 30, 2023

These precisely engineered products can withstand severe weather conditions, providing a robust barrier against storms, debris, and potential break-ins. These doors consist of high-quality materials and innovative manufacturing techniques, ensuring they can withstand the test of time.

Windows 52

Windows Safety Installation Glass 52

Architizer

OCTOBER 7, 2022

In medical terms, biomaterial refers to a substance engineered to interact with biological systems for a medical purpose (like a heart valve or bone graft). In the design industry, when we discuss biomaterials, we are actually talking about bio-based materials, which are derived and manufactured from living organisms.

Materials 52

Materials Commercial Interior Industrial 52

The Architecture Designs

FEBRUARY 22, 2024

Connect with the following to grow your network: Industry Professionals Benefits of Connecting Manufacturers Gain insights into new technology and equipment features. Establish connections with: Equipment manufacturers. While formal education is not mandatory, degrees in business or engineering can be beneficial.

Industrial 52

Industrial Client Clients Contract 52

Architizer

SEPTEMBER 13, 2022

Regulations for developing infrastructure is a rigid, bureaucratic process that makes it difficult to insert the flexibility necessary for participatory planning. Our areas of expertise are repurposing existing infrastructures, manufactured islands, coastal planning & protection, and ports. © ORG Permanent Modernity.

Landscape 67

Landscape Sustainability Development Developer 67

e-architect

OCTOBER 16, 2023

Archi-Tectonics used BIM in coordination with structural engineer Thornton Tomasetti and a local fabricator to test how different module dimensions impacted the cost, constructability, and visual effect of the facade. The glass encloses a sweeping lobby with ramps and bridges that wrap around the inner bowl.

Masterplanning 65

Masterplanning Structural Engineering Roofing Glass 65

Community Architect

JUNE 10, 2021

According to a 2017 United Nations Environment Programme study the manufacture of building materials alone makes up 11% of total global greenhouse gas emissions. Engineered lumber, specifically cross laminated timber (CLT) is rapidly positioning itself as the "green" kid on the block that can replace concrete and steel in many cases.

Sustainability 52

Sustainability Construction Construction Building 52

Building and Interiors

APRIL 20, 2022

Since its inception in 1955, Faber has been innovating, designing and manufacturing exceptional kitchen technologies that are global and user-friendly in their consumption. Bosch is a German firm that manufactures auto parts and appliances and is Europe’s largest auto parts and appliance maker. B U Y H E R E .

Technology 98

Technology Technology Manufacturing Information 98

Community Architect

MAY 25, 2021

Today's investors, developers, architects, engineers and buyers are expected to consider energy usage, carbon emissions, up-front carbon, operational carbon and life cycle carbon to just mention a few terms. In a complicated supply chains extensive reporting is needed from every supplier and manufacturer.

Sustainability 52

Sustainability Building IT Regulation 52

e-architect

AUGUST 21, 2023

Ahmedabad, once a leading diamond manufacturing hub, served as a prominent diamond cutting centre globally. A glass skylight has been engineered to project out of the double heighted reception lobby, supplying ample natural light into the space while tactfully being shaded by the tower itself.

Consulting 50

Consulting Glass Zoning Site 50

e-architect

APRIL 2, 2023

Throughout 200 years of its history, the city has alternately been an outpost, a ground for fierce bat-tles, a railroad hub, a performance excellence champion in oil and petrochemical industries, machine manufacturing, and agri-food production. The agency was founded in 1997.

Masterplanning 52

Masterplanning Government Urban Development Development 52

Building and Interiors

APRIL 26, 2022

It is the science of regulating noise in buildings, which includes minimizing noise transmission between spaces and controlling noise levels. With this in mind, architects and engineers typically recommend using non-combustible materials when constructing a building because they emit less smoke.

Space 59

Space Interior Safety Materials 59

Deezen

JUNE 15, 2023

Also included is a commercial hub that captures Lancashire 's manufacturing history and a public commons in Manchester designed for inclusivity. Dezeen School Shows: a thesis design that facilitates beekeeping and botany activities is included in Dezeen's latest school show by students at Manchester School of Architecture.

Students 95

Students Architecture Student Project Architecture 95