flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Student Housing ProCONNECT event draws developers, contractors, architects, and building product manufacturers to Denver

Multifamily Housing

Student Housing ProCONNECT event draws developers, contractors, architects, and building product manufacturers to Denver

2½-day event connects attendees with vendors—and each other.


By BD+C Staff | December 9, 2019
Student Housing ProCONNECT event draws developers, contractors, architects, and building product manufacturers to Denver

The Student Housing ProCONNECT event took place on November 10-12, 2019, in Denver.

   

Developers, general contractors, and architects, whose firms have built more than 300,000 student residence beds in recent years, were represented at Student Housing ProCONNECT on November 10-12, 2019.

The event gave the 25 development professionals the opportunity to meet 1-on-1 with building product manufacturers serving the student residence sector. Equally valuable, according to attendees, was the ability to network with other design, construction, and development professionals from across the U.S. in a relaxed environment.

Alan Schlossberg, AIA, LEED AP, Principal and Chief Operating Officer of architecture firm Perkins Eastman, said, “I learned a lot about what vendors have to offer us” in the course of the 2½-day event at the Le Meridien Hotel, in downtown Denver. “I loved the intimacy of the event,” said Schlossberg. Meeting other experts in the student residence sector was also “really fruitful for me,” he said.

  

   

Nathan Kim, Education, Civic, & Culture Leader, Studio Director, and Principal at Gensler—the world’s largest architecture firm—said ProCONNECT was helpful not only in learning about the cost and benefits of the vendors’ products, but also “helping us as designers really push forward in innovative ways in our work.”

 

ProCONNECT event Schedule for 2020

Student Housing ProCONNECT, Renaissance Hotel, Nashville, November 2020

Multifamily ProCONNECT, Ritz-Carlton, Dallas, March 8-10, 2020

Class A Office/Workplace ProCONNECT, Andaz Resort, Scottsdale, Ariz., September 2020

ProCONNECT events serving the single-family housing market will be held April 27-29 in Miami Beach, Fla.; May 10-12 in Dallas (local builders only); and October 28-30 in San Diego.

For more information, contact:
Dan Gardner, ProCONNECT Program Director
dgardner@sgcmail.com
989-860-7930

Related Stories

MFPRO+ News | May 1, 2024

On the Domino Sugar refinery site, new Brooklyn condominiums offer views of the Manhattan skyline

In Brooklyn, New York’s Williamsburg neighborhood, the new One Domino Square is the first condominium development and the third ground-up residential building on the site of the Domino Sugar refinery. The 700,000-sf project is adjacent to Domino Square and anchors a new 11-acre public park.

MFPRO+ News | Apr 29, 2024

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

Senior Living Design | Apr 24, 2024

Nation's largest Passive House senior living facility completed in Portland, Ore.

Construction of Parkview, a high-rise expansion of a Continuing Care Retirement Community (CCRC) in Portland, Ore., completed recently. The senior living facility is touted as the largest Passive House structure on the West Coast, and the largest Passive House senior living building in the country.

ProConnect Events | Apr 23, 2024

5 more ProConnect events scheduled for 2024, including all-new 'AEC Giants'

SGC Horizon present 7 ProConnect events in 2024.

Mixed-Use | Apr 23, 2024

A sports entertainment district is approved for downtown Orlando

This $500 million mixed-use development will take up nearly nine blocks.

Resiliency | Apr 22, 2024

Controversy erupts in Florida over how homes are being rebuilt after Hurricane Ian

The Federal Emergency Management Agency recently sent a letter to officials in Lee County, Florida alleging that hundreds of homes were rebuilt in violation of the agency’s rules following Hurricane Ian. The letter provoked a sharp backlash as homeowners struggle to rebuild following the devastating 2022 storm that destroyed a large swath of the county.

Student Housing | Apr 19, 2024

$115 million Cal State Long Beach student housing project will add 424 beds

A new $115 million project recently broke ground at California State University, Long Beach (CSULB) that will add housing for 424 students at below-market rates. The 108,000 sf La Playa Residence Hall, funded by the State of California’s Higher Education Student Housing Grant Program, will consist of three five-story structures connected by bridges.

Sponsored | Multifamily Housing | Apr 19, 2024

5 Reasons to Opt for Wood I-Joists in Multifamily Construction

From versatility to reliability and adaptability, engineered wood I-joists offer builders, designers and developers numerous advantages in multifamily construction. Discover the top five benefits and handy installation tips.

MFPRO+ News | Apr 18, 2024

Marquette Companies forms alliance with Orion Residential Advisors

Marquette Companies, a national leader in multifamily development, investment, and management, announces its strategic alliance with Deerfield, Ill.-based Orion Residential Advisors, an integrated multifamily investment and operating firm active in multiple markets nationwide.

MFPRO+ New Projects | Apr 16, 2024

Marvel-designed Gowanus Green will offer 955 affordable rental units in Brooklyn

The community consists of approximately 955 units of 100% affordable housing, 28,000 sf of neighborhood service retail and community space, a site for a new public school, and a new 1.5-acre public park.

boombox1 - default
boombox2 -
native1 -

More In Category


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021