flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

LEGOLAND builds 12-foot replica of One World Trade Center

LEGOLAND builds 12-foot replica of One World Trade Center

The model was meticulously created by a team of expert LEGO model builders entirely out of 4,873 LEGO bricks, taking more than 260 hours to design and build.


By BD+C Staff | July 1, 2013
Steve Plate, Director of World Trade Center Construction places a LEGO US Flag on a LEGO replica of One World Trade Center during the model's unveiling at LEGOLAND Discovery Center Westchester on June 28, 2013. (Photo Credit: Port Authority/ Mike Dombrowski)
Last Friday, the LEGOLAND Discovery Center Westchester in Yonkers, N.Y., celebrated the completion of a LEGO replica of One World Trade Center by lighting the 12-foot-tall, 100-pound model. Members of the Port Authority Police Honor Guard were there to mark the event.
 
The model was meticulously created by a team of expert LEGO model builders entirely out of 4,873 LEGO bricks, taking more than 260 hours to design and build. It re-creates One WTC’s distinctive architecture and design with LEGO bricks, from its dynamic, shimmering glass surface all the way up to its magnificent spire.
 
One WTC is being added to MINILAND, the attraction’s signature re-creation of landmark locations and buildings throughout New York City and Westchester County. Every five minutes, the One WTC model and MINILAND complete a day to night cycle, with the building and landmark locations illuminated as appropriate for the time of day.  Adding to the atmosphere are hundreds of interactive LEGO MINIFIGURES and vehicles and sounds, including moving mini cars, trucks and boats; a working subway train accompanied by familiar sounds; and a mini rock band jamming in Central Park.
 
Just the fifth such location in the nation, LEGOLAND Discovery Center Westchester is a $12 million, 32,300-sf indoor attraction that offers a range of educational and interactive experiences, such as hands-on play areas, a 4D cinema, Model Builder Academy, two LEGO amusement rides, and MINILAND.
 
 
Guests at LEGOLAND Discovery Center Westchester watch a LEGO replica of One World Trade Center light up following a special ceremony unveiling the model on June 28, 2013. Photo courtesy Port Authority, Mike Dombrowski
 
 
 
A LEGO replica of One World Trade Center stands tall above the MINILAND exhibit at LEGOLAND Discovery Center Westchester following a special ceremony unveiling the model on June 28, 2013. Photo courtesy Port Authority, Mike Dombrowski

Related Stories

MFPRO+ News | Apr 29, 2024

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

K-12 Schools | Apr 29, 2024

Tomorrow's classrooms: Designing schools for the digital age

In a world where technology’s rapid pace has reshaped how we live, work, and communicate, it should be no surprise that it’s also changing the PreK-12 education landscape.

Adaptive Reuse | Apr 29, 2024

6 characteristics of a successful adaptive reuse conversion

In the continuous battle against housing shortages and the surplus of vacant buildings, developers are turning their attention to the viability of adaptive reuse for their properties.

AEC Innovators | Apr 26, 2024

National Institute of Building Sciences announces Building Innovation 2024 schedule

The National Institute of Building Sciences is hosting its annual Building Innovation conference, May 22-24 at the Capital Hilton in Washington, D.C. BI2024 brings together everyone who impacts the built environment: government agencies, contractors, the private sector, architects, scientists, and more. 

Mass Timber | Apr 25, 2024

Bjarke Ingels Group designs a mass timber cube structure for the University of Kansas

Bjarke Ingels Group (BIG) and executive architect BNIM have unveiled their design for a new mass timber cube structure called the Makers’ KUbe for the University of Kansas School of Architecture & Design. A six-story, 50,000-sf building for learning and collaboration, the light-filled KUbe will house studio and teaching space, 3D-printing and robotic labs, and a ground-level cafe, all organized around a central core.

Sports and Recreational Facilities | Apr 25, 2024

How pools can positively affect communities

Clark Nexsen senior architects Jennifer Heintz and Dorothea Schulz discuss how pools can create jobs, break down barriers, and create opportunities within communities.

Senior Living Design | Apr 24, 2024

Nation's largest Passive House senior living facility completed in Portland, Ore.

Construction of Parkview, a high-rise expansion of a Continuing Care Retirement Community (CCRC) in Portland, Ore., completed recently. The senior living facility is touted as the largest Passive House structure on the West Coast, and the largest Passive House senior living building in the country.

Hotel Facilities | Apr 24, 2024

The U.S. hotel construction market sees record highs in the first quarter of 2024

As seen in the Q1 2024 U.S. Hotel Construction Pipeline Trend Report from Lodging Econometrics (LE), at the end of the first quarter, there are 6,065 projects with 702,990 rooms in the pipeline. This new all-time high represents a 9% year-over-year (YOY) increase in projects and a 7% YOY increase in rooms compared to last year.

Architects | Apr 24, 2024

Shepley Bulfinch appoints new Board of Director: Evelyn Lee, FAIA

Shepley Bulfinch, a national architecture firm announced the appointment of new Board of Director member Evelyn Lee, FAIA as an outside director. With this new appointment, Lucia Quinn has stepped down from the firm’s Board, after serving many years as an outside board advisor and then as an outside director. 

ProConnect Events | Apr 23, 2024

5 more ProConnect events scheduled for 2024, including all-new 'AEC Giants'

SGC Horizon present 7 ProConnect events in 2024.

boombox1 - default
boombox2 -
native1 -

More In Category

MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021