Farmers Market Pavilion and Plaza Tour

 

Interior of the Farmers Market Pavilion (all photos by me).

Another week, another well-attended tour of a noteworthy project in Eugene. This time, the Willamette Valley Chapter of the Construction Specifications Institute, AIA Eugene, and the Willamette Valley Section of ASLA Oregon teamed to provide an insider’s look at the Farmers Market Pavilion and Plaza, which are rapidly approaching completion. During the tour, key members of the design and construction team provided a wealth of background information, greatly enhancing tour-goers’ understanding about what is destined to become a transformative project for downtown Eugene.
 
Our tour guides included Tanner Perrine, Senior Project Manager with Lease Crutcher Lewis (and current CSI Willamette Valley Chapter president) and Assistant Project Manager Riley Allen. Tanner and Riley described unique aspects of the construction process, including the decision to procure the pavilion’s cross-laminated timber panels from nearby D.R. Johnson Lumber Co. rather than a lower-cost Canadian source. This decision reflected Lewis’ commitment to sourcing products locally and minimizing the project’s carbon footprint, but also the challenges and uncertainties associated with cross-border commerce.

(l to r): Matt Koehler, Riley Allen, and Tanner Perrine.

Farmers Market Pavilion

 
Matt Koehler, ASLA, LEED AP, principal with Cameron McCarthy Landscape Architecture & Planning, and Christine Rumi, RA, LEED AP, associate partner with FFA Architecture & Interiors, ably presented the design team’s perspective. As I reported previously, the Farmer’s Market Pavilion and Market Plaza comprise just the initial phase of the greater Eugene Town Square redevelopment of Eugene’s historic park blocks. Matt addressed the challenges posed by the necessity of anticipating the Town Square’s phased development in the project’s design, as well as the Lane County Farmers Market mandate to utilize “hard” surfaces to accommodate as many vendor’s booths as possible (disqualifying the incorporation of lawn areas). Christine highlighted FFA’s strategic use of a simple, luminous form that not only alludes to agricultural greenhouses, but also wrings the biggest possible bang out of a very limited budget.

Interior view looking north.

Cross section of CLT wall panel.

 

What impressed me most during the tour is the spaciousness of both the pavilion interior and the plaza outside, which isn’t immediately evident if you only view the design while passing by the site in a car. Vendors and shoppers alike will enjoy a more interconnected, shared experience and sense of place than offered by any of the market’s previous incarnations. I suspect the combination of interior and exterior space for vendor booths will lead to the participation of more growers, enhancing the selection and variety of produce offerings.

View looking west across the Market Plaza toward the Pavilion. Note the pattern of different types of concrete paving. The areas around the trees will be infilled with tightly compacted decomposed granite.

 

When completed, Cameron McCarthy’s assertive patterning of colored and hand-seeded aggregate concrete panels, and decomposed granite will complement the relative plainness of the Market Pavilion. Matt said the composition of the concrete and DG panels alludes to the modernist design for the two Park Blocks to the south across 8th avenue, for which the art of painter Piet Mondrian inspired Wilmsen Endicott Architects and Lloyd Bond Landscape Architect’s 1958 design. The quality of the Market Plaza concrete already in place is outstanding, with nary a cracked panel in sight. 

I did find the 8,500 sf pavilion perhaps a tad too refined and crystalline in character. The board and batten lower walls will be painted white, further reinforcing its iceberg-like appearance. The polycarbonate panels that clad its upper surfaces aren’t as transparent as FFA’s renderings suggested they would be. On the other hand, the building’s simple form will function as a backdrop for the bustle of activities on the Market Plaza and suitably defer to a future Eugene City Hall, to be constructed at the north end of the plaza.  

West wall of the market hall. The metal straps toward the top of the wall are structural and will be concealed behind acoustical wall panels.

 
Whereas the exterior of the pavilion is icily cool, the exposed mass timber framing and CLT panels inside are warm and inviting. Most of the wood will remain exposed, but the upper portion of the west wall that separates the market hall from support spaces will be covered by acoustical panels to dampen reverberant noise. That surface will additionally host a specially commissioned piece of art. Likewise, the City of Eugene selected an artist to paint a mural on a portion of the building’s exterior facing West Park Street. I expect the art pieces to add a desirable touch of color to the building.
 

West side of the Pavilion, facing West Park Street. The area of yellow panels will receive a painted mural.

The Lane County Farmers Market intends to move in and welcome the community to the new Market Pavilion and Plaza on Memorial Day weekend, less than two short months from now. I’m looking forward to seeing the design come alive, bringing active uses back to what historically had been part of Eugene’s most important civic open space.